Field Template Striplight 1/2in

The New 1/2" Striplight Placemat 2010 is divided into all of today's major strip food groups; LED units and tungsten-based units. The cutouts are all aligned on the patented ProTrak 50 system (Showing you the distance required between every strip). The printed portions of striplight on either side of each symbol are pre-measured distances to adjacent striplights from the symbol hole. The two striplights are now accurately pre-spaced apart. Across the top is a sectional view of each type of striplight, showing the true vertical distance between each strip to the C-Clamp on the batten. On the left side of each cutout symbol, the printed numbers list the length and weight of each striplight. The small triangles above and below each cutout symbol indicates the center of that striplight. And each one comes with a little hole so you can mark that center point directly on the drafting. The printing under each cutout symbol indicates the number of lamps and every circuitry possibility for that striplight. On the right of each group is a small folded back Post-it (with a pair of scissors) indicating the cut color size of that type of strip. The vertical slits on either side of each cutout symbol can be used to trace trunions (indicating that strip as a groundrow unit). Horizontal and vertical arrows are included in the PAR 56 group. Those can be drawn to indicate the axes of the lamps, or the focus direction of the entire unit. Three sizes of circuitry symbols are on the right hand side of the template (including horizontal rectangles and diamonds! Yowsah!) Underneath the top pair of them is a handy set of small circles (to indicate twofering). Below the third set of circuitry symbols is a scaled scenery bumper. The 1/2" scaled rulers that run along each side of the template are reversed one side to the other. (So you don't have to flip the template like a pancake to measure distances left and right from centerline).