DM13A Component kit for 8X8X8 RGB LED Cube Base / Driver board

Description: This component kit contains the following parts which is for DIY aseembly of 8x8x8 RGB LED Cube Base/Driver Board from SuperTech-IT. Please note that the kit Does not include RGB LEDs, or and PCBs or parts for bridge boards or music module We are the official supplier from the maker of this project SuperTech-IT, the kit 100% works well with his PCB and we have his most update BOM, so please note that kits from other seller are not guaranteed to work. The RGB LEDs for the assembly can be ordered HERE Please visit the official website www.TheLEDCube.com for further assembly information Instructable is HERE 0.1uF capacitor - 15pcs 1K metal film or carbon resistor 1/4W - 40pcs BD136 PNP transistor - 8pcs 74HCT541 buffer/driver DIP - 1pcs 20 pin 2 X10 female header - 1pcs 20 pin DIP IC Socket - 1pcs 1117V33 TO220 3.3V regulator - 1pcs Header pin strip (40 pins) - 2pcs 4A pico fuse Fast Blow - 1pcs 0.5A pico fuse Fast Blow - 1pcs 2.1mm female power input jack - 1pcs 100uF electrolytic capacitor - 1pcs 1000uF electrolytic capacitor - 1pcs reset button - 1pcs Jumper Caps - 4pcs DM13A LED Controller DIP - 12pcs DM13A DIP socket - 12pcs 5mm LED (Green and Yellow) - Both 1 pcs